Skip to main content
Deutsch Español Français Italiano Nederlands (Nederland) Português

Search

How can we help?

Don't worry, we got you!

How to set up and add printing paper to the Flipdish terminal

Flipdish Support
  • Updated
How to set up and add printing paper to the Flipdish terminal. 
 
Requirements:
Flipdish Terminal
Flipdish portal access - Owner Access
 
Video:
 
Setting up the Terminal unit

Once you have the Terminal, follow these steps to set up in-store:

 

  • Boot up the unit by holding the small power button on the left hand side for 2-3 seconds.

  • Begin the setup.

  • Choose your preferred language.

  • Establish your time settings.

  • Select WLAN in network in order to set up your WiFi.

  • Click WLAN to be connected and enter the passcode (1234)

  • Select 'Start Config' once you have activated the device.

  • Wait while the app downloads completely. Do not skip this step as it will interrupt setup.

  • A PIN code should now appear on your screen (as shown below).

 

From here you can either log into the portal and attach the Terminal yourself or if you'd prefer you can call up Flipdish, tell a support agent this PIN code and they will be able to immediately connect your new Terminal to the Flipdish system. After this, you're fully set up and good to go!

For more information please contact "help@flipdish.com".

 

To learn more about Flipdish’s products or how to grow your online business enroll for FREE in the Flipdish Academy here: http://academy.flipdish.com/

Comments

0 comments

Article is closed for comments.