To restore your Terminal to factory settings, follow the below steps:
Video:
Before you start:
-
The device is on a full charge or connected to the charger.
-
Have your WIFI network name and password at hand.
*Some words might differ depending on the language you choose*
1- Hold the small power button on the left-hand side of the Terminal for 2-3 seconds.
This will bring up a screen with the options of: 'Reboot', 'Power Off' and 'Exit Kiosk'.
2- Select "Exit Kiosk" on the top right.
3- Enter the PIN code "1234".
This PIN code will bring you back to the home screen where the Terminal will act very much like an Android device.
4 - Select "Settings" (Swipe "left" or "right" if not found)
5- Scroll down to "Personal"
6- Select "Reset"
7 - Select "Factory data reset"
8 - Select "Reset phone"
9 - Select "Erase everything"
The device will restart (An orange flower will appear) and it takes a few minutes.
A Hello Page will appear in different languages:
10 - Click on the arrow " > " pointing "right"
11 - Select the language of your choice
12 - Click on "next" (bottom)
13 - Select your "Time Zone"
14 - Click on "next" (bottom)
15 - Select your network type WIFI
16 - Select your "Network name"
17 - Type your password
Best if they select the "eye" to see the password, in case there's a typo.
18 - Select "Start Config" (bottom)
19 - The below window will appear (Please wait until it loads)
20 - A new window will appear (Please do not skip this step)
22 - "Terminal by Flipdish app" should open.
To learn more about Flipdish’s products or how to grow your online business enrol for FREE in the Flipdish Academy here: http://academy.flipdish.com/
Comments
0 comments
Article is closed for comments.