Steps and video of how to replace the paper on Kiosks per model
- Paper roll size for all kiosks: 80 x 60mm
- Open the latch on the right side (Facing the Kiosk from the front)
- Insert the roll of paper (The paper tip should hang from the front/top)
- Extend a bit of the paper so the tip will hang from the outside when closed.
-
Close the paper tray door.
|
 |
Video:
- Open the Kiosk (Using the Flipdish Key)
- Locate printer (Bottom of Kiosk)
- Pull lever
- Insert the thermal roll
- Close kiosk
|
 |
Video:
- Press the 2 side buttons
- Pull the door/lid
- Flick the latch at the top right of the black front frame (Printer door)
- Remove the rolling pin
- Insert the new paper on the rolling pin
- Insert the paper on the printer paper compartment
- Extend the tip (from the top), so you have a bit of access hanging when the printer door is closed.
|
 |
Video:
Note: The Kiosk might make a sound when the printer lid is not closed correctly, or the Kiosk paper is not placed correctly.
- Open the Kiosk (Using the Flipdish Key)
- Locate printer (Bottom of Kiosk)
- Pull lever
- Insert the thermal roll
- Close lid
- Close Kiosk
|
 |
Video:
To learn more about Flipdish’s products or how to grow your online business enroll for FREE in the Flipdish Academy here: http://academy.flipdish.com/
Comments
0 comments
Article is closed for comments.