1. Hold the power button
2. Select Exit Kiosk
3. Enter PIN code "1234"
4. Locate and open "Backup & Reset" (Under "Personal")
5. Select "Factory data reset"
6. Select "Reset device"
7. Select "Erase everything"

The device will reboot and the initial setup will start.

1. Press the 2 side buttons
2. Pull the door/lid
3. Press and hold the round power button on the left-hand side of the printer (Above the switch).
4. Select "Exit Kiosk" on the screen
5. Enter code “1234”
6. Go to Settings on the device
7. Select “Back up/reset”
8. Select “Factory data reset”
9. Select “Reset Device”
10. Select “Erase Everything”

The initial setup will begin (Select Language, Time zone, Network)